TIRE INSIGHT-BLE APP II2.4.0 - App Store
You'll be able to see results in few seconds.
Publisher Description
This App work with BLE TPMS (Bluetooth Low Energy Tire Pressure Monitoring
System) product series designed by CUB Elecparts Inc., BLE TPMS App provides driver
to get the real-time tire pressure data, temperature data and status through iOS
phones or smartphones. No receiver, no cable and no extra display device required.
It will detect the abnormal status and use audio/vibrating to alert driver, show the
abnormal data and tire location on APP.
BLE TPMS APP provides the following features as below.
(1) Applicable for Four-wheel passenger car and six-wheel pick-up.
(2) More vehicles could be registered to be monitored in each vehicle type, vehicle
image could be replaced by gallery or camera.
(3) Real-time check tire pressure and temperature alerting the driver with both
visual and audible alerts if one or more tire's pressure value are out of setting range.
(4) Tire ID learning: Deflation learning and Manual learning
(5) Tire pressure unit: psi, kPa, Bar Temperature unit:℉,℃
(6) Temperature/Pressure limit setting.
(7) Applicable in Background mode.
Continued use of GPS running in the background can dramatically decrease battery life.
Version History 1. Updated the CarPlay tire position display to show one tire per row, improving readability and overall clarity.
Note: Due to the new system architecture introduced in version 2.0, sensor IDs must be re-learned. If you are upgrading from version 1.0, please make sure to record your original sensor IDs before updating for easier reconfiguration afterward. 2.4.0 May 10 1. Added CarPlay support — connect to CarPlay to access related features.
2. Added Live Activity feature, allowing you to view real-time vehicle status in the notification center.
3. Live Activity is also displayed in the CarPlay split-screen interface (supported on iOS 26 or later only).
4. Improved overall app stability and performance.
Note: Due to the new system architecture introduced in version 2.0, sensor IDs must be re-learned. If you are upgrading from version 1.0, please make sure to record your original sensor IDs before updating for easier reconfiguration afterward. 2.3.9 Apr 1 1. Added support for six-wheel vehicle configuration
2. Improved application stability and overall performance
Notes: Due to the new system architecture introduced in version 2.0, sensor IDs must be relearned. If you are updating from version 1.0, please make sure to record your existing sensor IDs before updating to facilitate reconfiguration 2.2.5 Feb 25 - System architecture refactored to improve overall stability and performance 2.0.4 12/22/2025 1. Modify Input text
2. Modify temperature display error 1.5.11 04/23/2018 1. Change display message on chianese. 1.5.10 06/25/2017 1.All tyre data and alarm symbol will disappear if APP didn’t receive data in all tyres over 10 mins a it means the driver left his car, so it will clear the data and alarm. 1.5.7 04/18/2017 1. The Deutsch version modified display string. Note: Sensoren nur im Stillstand anlernen.Luftauffüller muss vorhanden sein! 1.5.5 03/29/2017 1.Fix setting save bottom and default setting bottom issue. 1.5.4 03/22/2017 1. The first default image is modified.
2. “Motorcycle” type is remove on Deutsch.
3. The English version shows an error. Note: the ID number of the motorcycle sensor is 7, please key-in the last 5 character or number of the sensor ID when doing the manual ID learning.
4.The Six wheel picture is modification. 1.5.2 03/20/2017 1. “Spanish interface” is added.
2. “Motorcycle” type is added. Note: the ID number of the motorcycle sensor is 7, please key-in the last 5 character or number of the sensor ID when doing the manual ID learning.
3. New function “Default vehicle display lock” is added. There is an icon switch “default display” below the vehicle photo in Setting page (the last photo in the attached gallery), after chose the target vehicle, it goes directly into the Driving page with this vehicle when APP is reset, will skip the “Garage” for choosing the vehicle. 1.5.1 01/08/2017 New models 1.5 09/13/2016 1.0 07/28/2016
About TIRE INSIGHT-BLE APP II
The company that develops TIRE INSIGHT-BLE APP II is CUB ELECPARTS INC. The latest version released by its developer is 2.4.0.
To install TIRE INSIGHT-BLE APP II on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-15 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the TIRE INSIGHT-BLE APP II as malware if the download link is broken.
How to install TIRE INSIGHT-BLE APP II on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the TIRE INSIGHT-BLE APP II is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After TIRE INSIGHT-BLE APP II is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 2.4.0
posted on 2026-10-15
Version History 1. Updated the CarPlay tire position display to show one tire per row, improving readability and overall clarity.
Note: Due to the new system architecture introduced in version 2.0, sensor IDs must be re-learned. If you are upgrading from version 1.0, please make sure to record your original sensor IDs before updating for easier reconfiguration afterward. 2.4.0 May 10 1. Added CarPlay support — connect to CarPlay to access related features.
2. Added Live Activity feature, allowing you to view real-time vehicle status in the notification center.
3. Live Activity is also displayed in the CarPlay split-screen interface (supported on iOS 26 or later only).
4. Improved overall app stability and performance.
Note: Due to the new system architecture introduced in version 2.0, sensor IDs must be re-learned. If you are upgrading from version 1.0, please make sure to record your original sensor IDs before updating for easier reconfiguration afterward. 2.3.9 Apr 1 1. Added support for six-wheel vehicle configuration
2. Improved application stability and overall performance
Notes: Due to the new system architecture introduced in version 2.0, sensor IDs must be relearned. If you are updating from version 1.0, please make sure to record your existing sensor IDs before updating to facilitate reconfiguration 2.2.5 Feb 25 - System architecture refactored to improve overall stability and performance 2.0.4 12/22/2025 1. Modify Input text
2. Modify temperature display error 1.5.11 04/23/2018 1. Change display message on chianese. 1.5.10 06/25/2017 1.All tyre data and alarm symbol will disappear if APP didn’t receive data in all tyres over 10 mins a it means the driver left his car, so it will clear the data and alarm. 1.5.7 04/18/2017 1. The Deutsch version modified display string. Note: Sensoren nur im Stillstand anlernen.Luftauffüller muss vorhanden sein! 1.5.5 03/29/2017 1.Fix setting save bottom and default setting bottom issue. 1.5.4 03/22/2017 1. The first default image is modified.
2. “Motorcycle” type is remove on Deutsch.
3. The English version shows an error. Note: the ID number of the motorcycle sensor is 7, please key-in the last 5 character or number of the sensor ID when doing the manual ID learning.
4.The Six wheel picture is modification. 1.5.2 03/20/2017 1. “Spanish interface” is added.
2. “Motorcycle” type is added. Note: the ID number of the motorcycle sensor is 7, please key-in the last 5 character or number of the sensor ID when doing the manual ID learning.
3. New function “Default vehicle display lock” is added. There is an icon switch “default display” below the vehicle photo in Setting page (the last photo in the attached gallery), after chose the target vehicle, it goes directly into the Driving page with this vehicle when APP is reset, will skip the “Garage” for choosing the vehicle. 1.5.1 01/08/2017 New models 1.5 09/13/2016 1.0 07/28/2016
version 2.4.0
posted on 2026-09-03
Version History 1. Updated the CarPlay tire position display to show one tire per row, improving readability and overall clarity.
Note: Due to the new system architecture introduced in version 2.0, sensor IDs must be re-learned. If you are upgrading from version 1.0, please make sure to record your original sensor IDs before updating for easier reconfiguration afterward. 2.4.0 May 10 1. Added CarPlay support — connect to CarPlay to access related features.
2. Added Live Activity feature, allowing you to view real-time vehicle status in the notification center.
3. Live Activity is also displayed in the CarPlay split-screen interface (supported on iOS 26 or later only).
4. Improved overall app stability and performance.
Note: Due to the new system architecture introduced in version 2.0, sensor IDs must be re-learned. If you are upgrading from version 1.0, please make sure to record your original sensor IDs before updating for easier reconfiguration afterward. 2.3.9 Apr 1 1. Added support for six-wheel vehicle configuration
2. Improved application stability and overall performance
Notes: Due to the new system architecture introduced in version 2.0, sensor IDs must be relearned. If you are updating from version 1.0, please make sure to record your existing sensor IDs before updating to facilitate reconfiguration 2.2.5 Feb 25 - System architecture refactored to improve overall stability and performance 2.0.4 12/22/2025 This app has been updated by Apple to prepare for watchOS 27 compatibility. No new features are included.
1. Modify Input text
2. Modify temperature display error 1.5.11 04/23/2018 1. Change display message on chianese. 1.5.10 06/25/2017 1.All tyre data and alarm symbol will disappear if APP didn’t receive data in all tyres over 10 mins a it means the driver left his car, so it will clear the data and alarm. 1.5.7 04/18/2017 1. The Deutsch version modified display string. Note: Sensoren nur im Stillstand anlernen.Luftauffüller muss vorhanden sein! 1.5.5 03/29/2017 1.Fix setting save bottom and default setting bottom issue. 1.5.4 03/22/2017 1. The first default image is modified.
2. “Motorcycle” type is remove on Deutsch.
3. The English version shows an error. Note: the ID number of the motorcycle sensor is 7, please key-in the last 5 character or number of the sensor ID when doing the manual ID learning.
4.The Six wheel picture is modification. 1.5.2 03/20/2017 1. “Spanish interface” is added.
2. “Motorcycle” type is added. Note: the ID number of the motorcycle sensor is 7, please key-in the last 5 character or number of the sensor ID when doing the manual ID learning.
3. New function “Default vehicle display lock” is added. There is an icon switch “default display” below the vehicle photo in Setting page (the last photo in the attached gallery), after chose the target vehicle, it goes directly into the Driving page with this vehicle when APP is reset, will skip the “Garage” for choosing the vehicle. 1.5.1 01/08/2017 New models 1.5 09/13/2016 1.0 07/28/2016
version 2.4.0
posted on 2026-08-21
Version History 1. Updated the CarPlay tire position display to show one tire per row, improving readability and overall clarity.
Note: Due to the new system architecture introduced in version 2.0, sensor IDs must be re-learned. If you are upgrading from version 1.0, please make sure to record your original sensor IDs before updating for easier reconfiguration afterward. 2.4.0 May 10 1. Added CarPlay support — connect to CarPlay to access related features.
2. Added Live Activity feature, allowing you to view real-time vehicle status in the notification center.
3. Live Activity is also displayed in the CarPlay split-screen interface (supported on iOS 26 or later only).
4. Improved overall app stability and performance.
Note: Due to the new system architecture introduced in version 2.0, sensor IDs must be re-learned. If you are upgrading from version 1.0, please make sure to record your original sensor IDs before updating for easier reconfiguration afterward. 2.3.9 Apr 1 1. Added support for six-wheel vehicle configuration
2. Improved application stability and overall performance
Notes: Due to the new system architecture introduced in version 2.0, sensor IDs must be relearned. If you are updating from version 1.0, please make sure to record your existing sensor IDs before updating to facilitate reconfiguration 2.2.5 Feb 25 - System architecture refactored to improve overall stability and performance 2.0.4 12/22/2025 This update from Apple will improve the functionality of this app. No new features are included.
1. Modify Input text
2. Modify temperature display error 1.5.11 04/23/2018 1. Change display message on chianese. 1.5.10 06/25/2017 1.All tyre data and alarm symbol will disappear if APP didn’t receive data in all tyres over 10 mins a it means the driver left his car, so it will clear the data and alarm. 1.5.7 04/18/2017 1. The Deutsch version modified display string. Note: Sensoren nur im Stillstand anlernen.Luftauffüller muss vorhanden sein! 1.5.5 03/29/2017 1.Fix setting save bottom and default setting bottom issue. 1.5.4 03/22/2017 1. The first default image is modified.
2. “Motorcycle” type is remove on Deutsch.
3. The English version shows an error. Note: the ID number of the motorcycle sensor is 7, please key-in the last 5 character or number of the sensor ID when doing the manual ID learning.
4.The Six wheel picture is modification. 1.5.2 03/20/2017 1. “Spanish interface” is added.
2. “Motorcycle” type is added. Note: the ID number of the motorcycle sensor is 7, please key-in the last 5 character or number of the sensor ID when doing the manual ID learning.
3. New function “Default vehicle display lock” is added. There is an icon switch “default display” below the vehicle photo in Setting page (the last photo in the attached gallery), after chose the target vehicle, it goes directly into the Driving page with this vehicle when APP is reset, will skip the “Garage” for choosing the vehicle. 1.5.1 01/08/2017 New models 1.5 09/13/2016 1.0 07/28/2016
version 2.2.5
posted on 2026-02-25
1. Added support for six-wheel vehicle configuration
2. Improved application stability and overall performance
Notes: Due to the new system architecture introduced in version 2.0, sensor IDs must be relearned. If you are updating from version 1.0, please make sure to record your existing sensor IDs before updating to facilitate reconfiguration
version 2.0.4
posted on 2025-12-22
- System architecture refactored to improve overall stability and performance
version 1.5.11
posted on 2018-04-23
Apr 23, 2018 Version 1.5.11
This app has been updated by Apple to display the Apple Watch app icon.
1. Modify Input text
2. Modify temperature display error
version 1.5.11
posted on 2018-04-23
Apr 23, 2018 Version 1.5.11
1. Modify Input text
2. Modify temperature display error
version 1.5.11
posted on 2018-04-23
Apr 23, 2018 Version 1.5.11
This app has been updated by Apple to use the latest Apple signing certificate.
1. Modify Input text
2. Modify temperature display error
version 1.5
posted on 2016-08-01
version 1.5.11
posted on 1970-01-01
23 de Abr de 2018 Version 1.5.11
1. Modify Input text
2. Modify temperature display error
Disclaimer
Official App Store Link
We do not host TIRE INSIGHT-BLE APP II on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for TIRE INSIGHT-BLE APP II is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
